Andhy Fathoni

tentang sebuah perjalanan…

Archive for the ‘Engineering Physics’ Career’ Category

Pentingnya Organisasi ketika Kuliah

with 5 comments

Hello guys….

Emm, beberapa waktu ini, banyak yang curhat ma aku. Espescially beberapa teman-teman yang masih baru. “Mas, aku kok bingung , kuliah mau ngapain??” Nah lo….

Pertanyaan pertama, apa tujuan kalian kuliah?? Saya yakin pasti pada pengen mendapatkan pekerjaan yang bagus. Nah, apa dengan kuliah saja cukup?? Jelas tidak. Kuliah hanya akan membekali kalian dalam bentuk hard skill. Skill yang memang dibutuhkan untuk menjadi seorang pekerja. Dengan serius menjalani kuliah dan tidak asal-asalan, hard skill itu pasti cukup untuk jadi ‘bekal’ memasuki dunia kerja. Read the rest of this entry »

Advertisements

Written by fathonezic

November 3, 2008 at 11:09 am

Dimana saja Alumnus Teknik Fisika beraksi??

with 55 comments

Halo pembaca !!
Tulisan ini masih ada banyak sangkut pautnya dengan posting jurusan berprospek dan prospek Teknik Fisika tentunya. Makin lama, Teknik Fisika memang makin menarik. Banyak yang bertanya pada saya tentang posisi pasti aksi-aksi alumni Teknik Fisika. OK, tanpa berpanjang lebar, silakan langsung menikmati… Read the rest of this entry »

Written by fathonezic

June 27, 2008 at 2:52 pm

Memperkenalkan Prospek Teknik Fisika UGM

with 117 comments

Sangat menarik memperbincangkan tentang Teknik Fisika di berbagai blog antara lain blog priandoyo, mas okto dll. Saya sempat membahas topik ini di Forum SPMB, dan posting Jurusan berprospek 5 tahun kedepan.

Nama asli Teknik Fisika sebenarnya adalah Fisika Teknik (Engineering Physics bukan Physics Engineering). Jurusan ini dibawa para dosen Belanda yang dulu mengajar di ITB.Diubah menjadi Teknik Fisika karena dulu di ITB ada tuntutan agar semua Teknik menyeragamkan namanya dengan nama Teknik ada didepan. Tapi bagaimanapun, internal Teknik Fisika tetap pada pendirian. anak Teknik Fisika sering disebut FT (di ITB) dan Fistek (di UGM). Keduanya singkatan dari Fisika Teknik.
Read the rest of this entry »

Written by fathonezic

May 27, 2008 at 10:40 am

Kerja !!

with one comment

Mulai bulan maret lalu, aku mendapatkan berita yang membuatku sangat gembira. Aku mendapat sms bahwa aku diterima di Warta Teknik. Alhamdulillah… Warta Teknik adalah sebuah majalah teknik yang diterbitkan oleh KATGAMA UGM dan didistribusikan di lingkup nasional. Akhirnya aku merasakan pekerjaan real sebagai seorang wartawan. Sebelumnya aku sempat menjadi reporter di beberapa media mahasiswa dan lokal Jogja, namun diterima di Warta Teknik memiliki tantangan lebih.

Read the rest of this entry »

Written by fathonezic

May 2, 2008 at 3:46 pm

Jurusan berprospek dalam 5 tahun kedepan

with 267 comments

Harus diakui, idealisme menjadi pertimbangan paling penting dalam pemilihan jurusan.
Hanya saja, tidak salah rasanya jika kita memilih jurusan berdasarkan prospek ke depannya
Disini saya ingin coba mengungkapkan sedikit dari hasil ‘investigasi’ saya terhadap perkembangan industri dan efeknya untuk prospek jurusan.

Read the rest of this entry »

Written by fathonezic

December 29, 2007 at 10:57 am

Lowongan di Conoco Phillips

with one comment

ConocoPhillips; System Specialist – LPG FSO Conversion
Indonesia career vacancy July 21, 2007 – August 04, 2007

EMPLOYMENT OPPORTUNITIES AT CONOCOPHILLIPS
ConocoPhillips is an international, integrated energy company headquartered in Houston, Texas, and operating in more than 40 countries. As a Production Sharing Contractor for BPMIGAS, we operate many producing and exploration blocks in Indonesia. To support our expanding operations in Indonesia, ConocoPhillips is looking for talented Indonesian nationals to fill in the following position.

SYSTEM SPECIALIST – LPG FSO CONVERSION

Responsibilities:

• The Position will become part of team to develop the technical bid spec for Permanent LPG FSO CONVERSION. The work to develop the technical Bid Specifications is scheduled to start and to progress during 2007, to continue with technical reviews during 2008 through Contract award in 2008 and project execution and delivery in 2009. In consequence the position needs to be filled in the year 2007, until end project in 2009.
• This position will lead a team of two national engineers (one electrical engineer, one instrument engineer) during the engineering design, conversion and commissioning work. This position also will be responsible to mentor and to train the selected national Electrical Engineer and Instrument Engineer for them to become Electrical and Instrumentation specialists for potential future assignment to other COPI projects.

Qualifications and Experience:

• Experience min. 15 years on Engineering and Design marine and offshore electrical and instrumentation systems for installation and operations onboard “special vessels with LPG Gas process and handling facilities”, and Extensive and proven experience in the design and engineering of electrical power generation, distribution and control of medium and low voltage AC systems and instrumentation systems.
• Proven experience in engineering and design of high voltage electric swivel connection and SCADA and PLC based control systems are critical for the position.
• Extensive and proven experience in working at shipyards for the conversion and fabrication LPG vessels and LPG FSO projects; and
• Good command of the English language as required to work with interdisciplinary project teams and international contractors

Those who are interested and meet the above requirements, write down THE POSITION TITLE you apply in the subject of your email. Send your application and CV not later than two weeks after the publication of this advertisement to:

RSCIndonesiaRecruitment@conocophillips.com

Only short listed candidates will be contacted for further interview.

Written by fathonezic

July 24, 2007 at 5:47 pm

Lowongan PT Freeport

with 7 comments

Teknik Fisika semakin diakui. Lulusannya makin banyak dicari perusahaan besar. Lowongan dibawah ini contohnya…

PT Freeport Indonesia; 6 Positions
Lowongan kerja teknik perusahaan tambang emas PMA di papua Juli July 11, 2007 – Agustus August 10, 2007

Career Opportunities at PT Freeport Indonesia
SUPERINTENDENT PROCESS CONTROL

Specific Requirements:
• Chemical Engineering (teknik kimia)or Engineering Physics (teknik fisika) with control systems emphasis background. Above 5 years Process Control experience in a Factory or Plant environment in the process industry (mineral processing desirable) with DCS control experience designing, configuring and optimizing complex control loops; Some PLC experience desirable; Some VB, VBA, or IT program experience; Quick adapting to, or enjoy, remote location living (work and leisure balance); Some project management/execution (conception to start-up) experience; Proactive process control loop maintenance management experience; Process Alarms maintenance and optimization experience.

GENERAL FOREMAN CONSTRUCTIONS RIGGER

Specific Requirements:
• S1 degree in Civil (teknik sipil) or Mine Engineering (teknik tambang/pertambangan) with at least 5 years working experiences as rigger.

SUPERINTENDENT ADVANCED PROCESS CONTROL

Specific Requirements:
• Bachelor degree in Metallurgical [metalurgi] (mineral processing), chemical (kimia), electrical (elektro/elektronik), or mechanical engineer (teknik mesin/mekanik) in excess of 10 years experience in the application of advanced process control in process industries preferably a master in advanced process control; IT applications in real time process control experience (fuzzy, model based, or multivariable/predictive, systems setup and configuration, Spreadsheet applications in data analysis or statistical software applications and some IT database experience.

CHIEF ENGINEER CIVIL GEOTECHNICAL

Specific Requirements:
• S1 degree in Geotechnical, Geological, Geodesy Engineering (teknik geoteknik, geologi, geodesi) with minimum 5 years working experience on civil-geotechnical section/projects, preferably in mining industry. Computer literacy and good understanding in practical geotechnical engineering software preferably SLOPE/W, PLAXIS, AutoCAD and AutoLAND. Able to operate the tools of theodolit, total station, level and gps; and familiar with traverse, dan Loop.

SUPERINTENDENT DUMP & SPECIAL PROJECT

Specific Requirements:
• S1 degree in Mine Engineering (teknik tambang pertambangan) with at least 10 years working experience in mining operations; experience with shovel and truck operations and dispatch; open pit mining operations; experience in Under Ground Operation or Engineering (Block Caving is preferable); Knowledge in Geo-technical and Geological Analysis; Have a background in Blasting Technique (KIM & Blaster 2); Able to operate AutoCAD, Vulcan, Shot plus-I, Microsoft Project.

Engineer Electrical & Instrumentation

Specific Requirements:
• S1 degree in Instrumentation Engineering (teknik instrumentasi) with at least 5 years working experiences preferably in mining industries.

General Requirements:
• Knowledge and ability in English both oral and written
• Good communication and supervision skills.
• Computer Literacy and good understanding in practical.
• Willing to work in a remote area – Papua
• Core competencies and skills in: Achievement Orientation, Analytical Thinking, Customer Service Orientation, Safety and Environment, Cultural Sensitivity, and Team Leadership.

If you are interested in career opportunity with us, please submit ONLY your Comprehensive Resume/CV stated with scanned Photo and Academic Transcript in Ms. Word. Please send No later than 1 month after this publication and include the Job Title. Only Short-Listed Candidates Will Be Notified for Interview.

The Email Subject is your Job Title to PTFIRecruiting@fmi.com

Written by fathonezic

July 24, 2007 at 5:46 pm